Seedbed cultivators

To apply
IDEAL SOIL PREPARATION FOR SOWING SMALL-SEEDED CROPS
Working width from 5 to 8 m
From 150 h.p.
From 4 500 kg
Working depth up to 8 cm
How does
the machine work?
Purpose
The seedbed cultivators prepare the soil for sowing small-seeded crops by creating an ideal flat and compacted seedbed. In the process of work, the soil is intensively loosened, sorted and released from weeds.
TECHNICAL
DATA
PARAMETER AN-8-PAV PAV-6
Working width, m 8 6
Tractor requirement, h.p. from 250 from 150
Connection Towing-eye 50 mm, towing-eye 90 mm for hydraulic hitch or cross shaft Cat. III/IV Crosshaft Cat. II/III
Required number of paired hydraulic outlets 3 2
Working depth, cm < 8 < 8
Working speed, km/h 8–10 8–10
Number of working sections, pcs. 4 4
Number of working zones, pcs. 6 6
Roller diameter, mm 400
400
A-blade width, mm 270 270
Tine overload protection Non–Stop spring or shear bolt Non–Stop spring or shear bolt
Tine spacing, mm 250 250
Crosskill roller diameter, mm 400 400
Tires 520/50–17 15.5/65–18
Length in the transport position, mm 6,05 5,65
Width in the transport position, mm 3 3
Height in the transport position, mm 4,2 2,39
Weight, kg 7220 4500
ADVANTAGES
6 WORKING ZONES FOR AN IDEAL RESULT
6 working zones form a perfectly even seedbed with a finely crumbly soil structure, creating conditions for high germinating ability and uniform growth of small seeds.
PRECISE DEPTH ADJUSTMENT
The parallelogram suspension provides the precise depth adjustment of both tine rows and creates a uniform seedbed.
CONVENIENT MOVEMENT ON ROADS
The unit width in the transport position is 3,0 mm.
CONFIDENT WORK ON THE DIFFICULT TERRAIN
Each section individually follows the field terrain, which is especially important when the soil is cultivated at shallow depths.
ПОСЕВНОЕ ЛОЖЕ НА ГЛУБИНЕ 2 СМ
Среди культиваторов, представленных на рынке, лишь немногие способны выполнять предпосевную обработку почвы на небольшой глубине: 2–3 см. Большинство культиваторов работают на глубине от 5 см.
ONE CARRIER — THREE IMPLEMENTS*
By purchasing a unit based on the AN-8 carrier, you get the opportunity to transform it into various implements. By replacing the purchased sections, you can assemble any of the three implements. * Only for AN-8-PAV
IMPORTANT OPTIONS
Can be transformed into KSO and BD
More
Spring overload protection
Cat — II
Cat — III
Cat — IV
Hinge for
the hydraulic hook
See the unit in operation
By clicking the «Submit», I agreeto the privacy policy